Municipal Pump Equipment

Pumps for Water Authorities, Treatment Facilities and Other Entities Within the Municipal Market.

Northwest Pump has a product line of the finest brands of Municipal Pumps.

  • Heavy Duty Recessed Impeller Pumps
    • ESSCO TUFSUB™ 100% recessed impeller severe duty vortex pumps designed with extra heavy wall cross sections and extra thickness in the internal wear areas. Pumps capable of handling long stringy material, large size solids, especially suited for handling slurries.

      Wear plate located behind the impeller, split volute design, casing thickness up to 1" in thinnest wear area. Offered in ten different metallurgies, sizes include 3x8, 3x12, 4x12, 4x16, 6x12, 8x6x17. Reliance brand motors offering both standard duty and U.L.listed explosion proof motors for Class 1, Division 1, group D hazardous locations.

      Both motor types include moisture detection and thermal protection as standard features, heavy duty bearings and dual mechanical seals. High temperature and energy efficient designs are available.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

  • Liquid Ring Vacuum Pumps
    • ROBUSCHI single stage liquid ring vacuum pumps are built for heavy duty industrial service with a wide range from 28 to 2,470 CFM single stage vari-flow port water and or oil service liquid vacuum (27.5" Hg) – pressure (29 psig) in eleven sizes to choose from.

      Available in cast iron, 316 stainless steel impeller & 100% 316 stainless. Models from RVS 3 – 21 available in Mono block integrated IE3 motor or Lantern Bearing block motor adaptor.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

      Brands Available

  • Packaged Booster Systems
    • AURORA INTELLIBOOST variable speed, constant pressure booster systems offering Pentair VFD for each pump, a programmable logic controller (PLC) with a Proportional Integral Derivative Loop (PID) to stage up to 2-4 pumps, either multistage or end suction, based on pressure and flow needs. Each system is factory assembled, wired and tested.

      Ethernet capable allowing the ability to connect with a Smart Phone network for system status and alarms through WI-FI. Seemingly endless programmable system features also including large touch screen, NEMA 1 enclosures, Pentair pumps, 304SS SCH 40 groove or ANSI flange manifolds, liquid gauges, steel base/manifold support, isolation and check valves. Many optional features are also available.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

      Brands Available

      Pentair Group

  • Submersible Non-Clog and Grinder Pumps
    • EBARA air cooled design Grinder Pumps 2HP through 15 HP pumps with lifts to 260 feet and flows to 190 GPM and are offered as complete turnkey systems or engineered to specification.

      Non-Clog Pumps 3" discharge through 12" discharge with 2" to 5.25" solids handling, 1 HP to 125 HP, Lifts to 280 feet and flows to 8000 GPM. Explosion-proof construction in both Grinder and non-clog designs on request.

      Accessories custom designed controls and alarm panels, liquid level controls, 3" through 12" guide rail lift-out packages. Junction boxes, both standard and explosion-proof.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

  • Positive Displacement Blower Packages
    • Gardner Denver offering 150 years of manufacturing experience for the “IQ” (Intensely Quiet design as low as 60 dBA) packaged system and well-known individual blower blocks you’ve come to know like CycloBlower®, HeliFlow®, TriFlow®, DuroFlow®, RBS®, and the Sutorbilt Legend® Industrial Blowers.

      Airflow up to 16,800 cfm, pressures up to 20 psi and 17’ Hg for vacuum. Tri Lobe models offer quiet, efficient shock-free operation with proven results. Heavy duty roller bearings take up to 100% radial forces while typically giving up to 100,000 hour bearing life.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

      Brands Available

      Gardner Denver

  • Peristaltic Hose Pumps
    • BLACKMER Abaque peristaltic line available in 10 sizes that provide flow rates of .07 to 290 GPM (15 to 66,000 L/h). Will handle abrasive fluids with little wear . Hoses are constructed of natural rubber, Buna or EPDM within the pump’s casing, provide high levels of volumetric accuracy for sampling, transfer, and metering applications.

      Ability to pass solids in the material being pumped. Dry-run capability allows tank and line stripping. Seal-less design eliminates leaks, contamination and wear problems associated with difficult to seal products. Self-priming up to 29.5 feet (9 meters). Reversible operation allows pumping in both directions.

      Durable construction of ductile iron and steel construction allow higher discharge pressures up to 217 psi (15 bar). Low maintenance requirements of the hose and shoes.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

      Brands Available

      PSG Dover Group

  • Heavy Duty Vertical Turbine Pumps
    • AMERICAN MARSH, LAYNE/VERTI-LINE
      and NATIONAL PUMP manufacture multi-stage vertical and submersible turbine pumps to meet any application or configuration and can provide all metallurgies.

      Full factory testing services are available as well as an in-house coating facility to meet the highest standards. These vertical turbine pumps are designed primarily for heavy duty, continuous operation, in municipal and industrial applications.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

      Brands Available

      Pentair Group

  • Municipal Non-Clog and Wastewater Pumps
    • AURORA is the leading manufacturer of centrifugal Cast Iron / Bronze fitted and all Cast Iron general service pumps. Pump capacities range up to 15,000 GPM with design heads up to 1000’ TDH, and temperatures up to 275-degree F.

      Various configurations available including: End Suction, Horizontal & Vertical Split Case, Vertical In-Line, Regenerative Turbine, Vertical Sump, and Horizontal & Vertical Sewage. Aurora pumps are ideal for applications such as: water supply, boiler feed and condensate return, wastewater sumps, sewage and irrigation with dynamically balanced impellers standard.

      Optional all bronze or special alloy pump construction and mechanical seals available.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

      Brands Available

      Pentair Group

      Ebara

  • Non-Metallic Vertical Turbine Pumps
    • FYBROC FRP Vertical Turbine with capacities to 1700 GPM (386 m3/hr), heads to 70 feet (21 m), working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2, working pressures to 150 PSI (1,035 kPa), fiberglass reinforced plastic (FRP) construction, multi-stage options available.

      High strength casings with 150 lb FF flanges, SS shaft material standard (other alloy options), NEMA/IEC, TEFC vertical high thrust motors, powder coated pedestal, mechanical seals std. Application examples: seawater intake, brackish water reverse osmosis, brine, recirculation and transfer.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

      Brands Available

      Met-Pro Pump Solutions

  • Progressive Cavity Pumps
    • CONTINENTAL progressive cavity pumps have a full line of P.C. pumps and aftermarket parts to chose from that interchange with most of the current-day products such as Moyno, Monoflo, Seepex, Tarby, Roper, etc.

       

      Contact us for more information about municipal pump equipment or to plan your custom solution.

undefined

Please contact us with questions or to plan your custom solution.

(800) 452-7867

Contact Us!

View our Locations >